36 x 36 in. Square Fire Pit Ring, 30 x 30 in. Inner, 10 in. Tall Carbon Steel Fire Pit Insert for DIY Campfire

Anchor a backyard campfire night with this 36 x 36 in. square fire pit ring, sized to match standard 36 in. paver squares for clean DIY integration with brick or stone surrounds. Built from 0.1 in. / 2.5 mm thick carbon steel, the ring carries far more heat-bearing mass than typical 1.5 mm liners, helping it resist warping through repeated wood-burning fires across multiple seasons in the patio. A matte black high-temperature powder coat resists rust, corrosion, and color fade under direct 1,000¡ãF flame contact, addressing the common concern about whether a steel ring will rust out after one wet winter. Eight panel sections bolt together with the included screws and wrench in minutes, so a single homeowner can assemble the ring on a Saturday morning without welding tools or specialty hardware. The inner 30 x 30 in. opening holds plenty of split firewood for a six-person gathering, while the 10 in. wall depth keeps embers contained instead of rolling out onto grass or patio pavers. Bury the ring partially below grade to create a sunken in-ground pit, set it on a stone hearth for an above-grade fire feature, or wrap it with retaining-wall blocks for a custom landscape centerpiece. Picture a fall evening with the square ring glowing low against the patio while marshmallows toast on long skewers.